Catalog

Commercial Hinges

SPRING HINGES

2079 SPRING HINGES AND FREE SWINGING HINGE SETS 1 set 2079 4- 1 / 2 " x 4 1 / 2 " US26D (652) EDP# 82-7188 to consist of: 2 each 2060R 4- 1 / 2 " x 4 1 / 2 " US26D , Steel 1 each FBB179 4- 1 / 2 " x 4 1 / 2 " US26D, Steel • For medium weight doors of average frequency • Installer uses one box of hinges on a door up to 7 ' 6 " (2286mm) in height • All hinges have template screw hole location to use on either wood or hollow metal doors and frames • Identical pivot point for all 3 hinges • Can be used on labeled doors (Refer to NFPA-80) Spring Hinges 2079 Spring Hinges and Free-Swinging Hinge Sets 1 set 2079 4 1/2” x 4 1/2” US26D (652) EDP# 82-7188 to consist of: • 2 each 2060R 4 1/2 x 4 1/2 US26D Steel • 1 each FBB179 4 1/2 x 4 1/2 US26D Steel • For medium weight doors of average frequency. • Installer uses one box of hinges on a door up to 7’ 6” (2285mm) in height. • All hinges have template screw hole location to use on either wood or hollow metal doors and frames. • Identical pivot point for all 3 hinges. • Can be used on labeled doors (Refer to NFPA-80). • 2060R conforms to ANSI K81071F • FBB179 conforms to ANSI A8112

Spring Hinge Location, When Using 2 Spring Hinges On a Door

Application guide lines for 2060R – 4- 1 / 2 " • 2060R conforms to ANSI K81071F. • FBB179 conforms to ANSI A8112.

Top CB or FBB Hinge

Door Size and Weight

Number of Spring Hinges Required

2 each No. 2060R, RD2060R or RD2068R with 1 each anti-friction bearing hinges of same size Application Guidelines for 2060R - 4 1/2” Door Size and Weight

For doors up to 130lbs. (59 Kg) not exceeding 3 ' 0 " x 7 ' 6 " x 1 3 / 4 " (914 x 2286 x 44mm) Size Gauge

Flat Head Screw Per Se 2 each No. 2060R, RD2060R, or RD2068R with 1 each anti-friction bearing hinges of the same size Wood Number of Spring Hinges Required

Spring Hinges

Open For doors up to 130 lbs (59 kg) not exceeding 3’ 0” x 7’ 6” x 1 3/4” (914 x 2286 x 44 mm) of Metal (Inches) (MM) (MM)

Class Number

(Inches)

Machine

Bottom CB or FBB Hinge

2079 4 1 /

2 x 4

1 / 2 (114x114) .134 (3.4) 24-12-24 x 1 /

2 24-12 x 1

1 /

2

Size Open

Metal Gauge

Flat Head Screw Per Se

Class Number

Typical Door Elevation when using 4 Hinges

Typical Door Elevation when using 3 Hinges

Inches

mm Inches mm Machine

Wood

2079 4 1/2 x 4 1/2 114 x 114 .134 3.4 24-12-24x 1/2

24-12 x 1 1/2

Flat Head Screws

Gauge of Metal

JLM Part # Size Open

Finish

Machine

Wood

Application

CM-148111

4 1/2 x 4 1/2

0.134

US 26D

8-24-12 x 1/2”

8-12-1 1/4”

Interior

Set includes one (1) BB hinge & two (2) self closing hinges

General Hinge Information Special Situation Products

Electrical Ratings

CM-81802

Suffix # Wires

Wire Gage

Volts

• “CE” Concealed Electric hinges conduct current regardless of door position to electric locks, exit devices, or hold open devices where tamper proof hinge is required. To transmit signals from code readers on doors to remote computers for access control. • No electrical parts are exposed when hinge is installed. • Permanent fast pin. • Hinge should be installed in the center hinge location. • Not available as swing clear or raised barrel. -58 8

AC: .5 amp/wire DC: 5 milli-amp/wire

28AWG

• Hinges may be equipped with both concealed wires and concealed switches. When both are desired on the same hinge use prefix “CECS“. • Packed one per box with all machine screws and installation instructions. • When ordering specify class number, size, finish, and number of wires: Suffix -54 for 4 wires, 56 for 6 wires, -66 for 6 wires (two @ 24AWG, 4 @ 28AWG), 58 for 8 wires, or 10 for 10 wires. • Should be used along with a junction box. • Can be furnished with hospital tips.

Jackson LUMBER & MILLWORK

A

1.

215

July 2026