Catalog

Commercial Masonry Frames

APPLICATIONS: Masonry Frames are typically used in the following types of wall construction:

Typical Masonry Frame

Wall Construction Application

Typical Wall Anchors

New Masonry Existing masonry

wrap or bolted

Wire Masonry

Jamb Depth

Stop

butted

Bolted Through Soffit

Rabbet

Rabbet

Soffit

Wire Masonry Anchor

Adjustable Base Anchor

Attached with S.M. screws (furnished)

Face

Throat Opening

Backbend

Backbend

Welded Corner

Maximum adjustment 1-3/8" below frame

Backweld

3/16" dia. wire

included with frame Included with frame

for new block wall construction CSWIRE For new block wall construction

• Flush Frames:

These frames are designed for installation as part of the wall framing sequence, and installed in interior and exterior applications. When installed, this frame series will either wrap or butt up against the wall construction. Anchoring will be either into the masonry wall, or to the stud systems.

Fasteners CM-63675 3/8" x 5" Phillips Drive Expansion Bolt

Use with pipe sleeve anchor in a masonry application CM-64507 3/8" x 5" Phillips Drive Wood Screw

CSPPSA For existing wall used with fastener below

Use with pipe sleeve anchor in a wood application

211

January 2025