Catalog
Commercial Masonry Frames
APPLICATIONS: Masonry Frames are typically used in the following types of wall construction:
Typical Masonry Frame
Wall Construction
Application wrap or bolted
Typical Wall Anchors
NewMasonry
Wire Masonry
Jamb Depth
Existing masonry
butted
Bolted Through Soffit
Stop
Rabbet
Rabbet
Soffit
Wire Masonry Anchor
Adjustable Base Anchor
Attached with S.M. screws (furnished)
Face
Throat Opening
Backbend
Backbend
Welded Corner
Maximum adjustment 1-3/8" below frame
Backweld
3/16" dia. wire
included with frame Included with frame
for new block wall construction CSWIRE For new block wall construction
• Flush Frames:
These frames are designed for installation as part of the wall framing sequence, and installed in interior and exterior applications. When installed, this frame series will either wrap or butt up against the wall construction. Anchoring will be either into the masonry wall, or to the stud systems.
Fasteners CM-63675 3/8" x 5" Phillips Drive Expansion Bolt
Use with pipe sleeve anchor in a masonry application
CSPPSA For existing wall used with fastener below
CM-64507 3/8" x 5" Phillips DriveWood Screw
Use with pipe sleeve anchor in a wood application
January 2023
135
Made with FlippingBook flipbook maker